az23-v-series vishay semiconductors 18070 12 3 document number 8 5759 rev. 1.6, 26-aug-10 www.vishay.com 1 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com small signal zener diodes, dual features ? these diodes are also available in other case styles and configurations including: the dual diode common cathode configuration with type designation dz23, the single diode sot-23 case with the type designation bzx 8 4c, and the single diode sod-123 case with the type designation bzt52c. ? dual silicon planar zener diodes, common anode ? the zener voltages are graded according to the international e 24 standard ? the parameters are valid for both diodes in one case. v z and r zj of the two diodes in one case is 5 % ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec mechanical data case: sot-23 weight: approx. 8 . 8 mg packaging codes/options: gs1 8 /10 k per 13" reel, ( 8 mm tape), 10 k/box gs0 8 /3 k per 7" reel, ( 8 mm tape), 15 k/box absolute maximum ratings t amb = 25 c, unless otherwise specified note 1) device on fiberglass substrate, see layout on page 6 thermal characteristics t amb = 25 c, unless otherwise specified note 1) device on fiberglass substrate, see layout on page 6 parameter test conditions symbol value unit power dissipation p tot 300 1) mw parameter test conditions symbol value unit thermal resistance junction to ambient air r thja 420 1) k/w junction temperature t j 150 c storage temperature range t stg - 65 to + 150 c
az23-v-series vishay semiconductors document number 8 5759 rev. 1.6, 26-aug-10 www.vishay.com 2 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com electrical characteristics note 1) tested with pulses t p = 5 ms part number marking code zener voltage range 1) dynamic resistance test current temperature coefficient of zener voltage reverse voltage v z at i zt r zj at i zt = 5 ma, f = 1 khz r zj at i zt = 1 ma, f = 1 khz i zt vz at i zt v r at i r = 100 na v ma 10 -4 /c v min. max. min. max. az23c2v7-v d1 2.5 2.9 75 (< 8 3) < 500 5 - 9 - 4 - az23c3v0-v d2 2. 8 3.2 8 0 (< 95) < 500 5 - 9 - 3 - az23c3v3-v d3 3.1 3.5 8 0 (< 95) < 500 5 - 8 - 3 - az23c3v6-v d4 3.4 3. 88 0 (< 95) < 500 5 - 8 - 3 - az23c3v9-v d5 3.7 4.1 8 0 (< 95) < 500 5 - 7 - 3 - az23c4v3-v d6 4 4.6 8 0 (< 95) < 500 5 - 6 - 1 - az23c4v7-v d7 4.4 5 70 (< 7 8 ) < 500 5 - 5 2 - az23c5v1-v d 8 4. 8 5.4 30 (< 60) < 4 8 05 - 3 4 > 0. 8 az23c5v6-v d9 5.2 6 10 (< 40) < 400 5 - 2 6 > 1 az23c6v2-v d10 5. 8 6.6 4. 8 (< 10) < 200 5 - 1 7 > 2 az23c6v 8 -v d11 6.4 7.2 4.5 (< 8 ) < 150 5 2 7 > 3 az23c7v5-v d12 7 7.9 4 (< 7) < 50 5 - 3 7 > 5 az23c 8 v2-v d13 7.7 8 .7 4.5 (< 7) < 50 5 4 7 > 6 az23c9v1-v d14 8 .5 9.6 4. 8 (< 10) < 50 5 5 8 > 7 az23c10-v d15 9.4 10.6 5.2 (< 15) < 70 5 5 8 > 7.5 az23c11-v d16 10.4 11.6 6 (< 20) < 70 5 5 9 > 8 .5 az23c12-v d17 11.4 12.7 7 (< 20) < 90 5 6 9 > 9 az23c13-v d1 8 12.4 14.1 9 (< 25) < 110 5 7 9 > 10 az23c15-v d19 13. 8 15.6 11 (< 30) < 110 5 7 9 > 11 az23c16-v d20 15.3 17.1 13 (< 40) < 170 5 8 9.5 > 12 az23c1 8 -v d21 16. 8 19.1 1 8 (< 50) < 170 5 8 9.5 > 14 az23c20-v d22 1 8 . 8 21.2 20 (< 50) < 220 5 8 10 > 15 az23c22-v d23 20. 8 23.3 25 (< 55) < 220 5 8 10 > 17 az23c24-v d24 22. 8 25.6 2 8 (< 8 0) < 220 5 8 10 > 1 8 az23c27-v d25 25.1 2 8 .9 30 (< 8 0) < 250 5 8 10 > 20 az23c30-v d26 2 8 32 35 (< 8 0) < 250 5 8 10 > 22.5 az23c33-v d27 31 35 40 (< 8 0) < 250 5 8 10 > 25 az23c36-v d2 8 34 3 8 40 (< 90) < 250 5 8 10 > 27 az23c39-v d29 37 41 50 (< 90) < 300 5 10 12 > 29 az23c43-v d30 40 46 60 (< 100) < 700 5 10 12 > 32 az23c47-v d31 44 50 70 (< 100) < 750 5 10 12 > 35 az23c51-v d32 4 8 54 70 (< 100) < 750 5 10 12 > 3 8
az23-v-series vishay semiconductors document number 8 5759 rev. 1.6, 26-aug-10 www.vishay.com 3 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com electrical characteristics note 1) tested with pulses t p = 5 ms part number marking code zener voltage range 1) dynamic resistance test current temperature coefficient of zener voltage reverse voltage v z at i zt r zj at i zt = 5 ma, f = 1 khz r zj at i zt = 1 ma, f = 1 khz i zt vz at i zt v r at i r = 100 na v ma 10 -4 /c v min. max. min. max. az23b2v7-v d1 2.65 2.75 75 (< 8 3) < 500 5 - 9 - 4 - AZ23B3V0-V d2 2.94 3.06 8 0 (< 95) < 500 5 - 9 - 3 - az23b3v3-v d3 3.23 3.37 8 0 (< 95) < 500 5 - 8 - 3 - az23b3v6-v d4 3.53 3.67 8 0 (< 95) < 500 5 - 8 - 3 - az23b3v9-v d5 3. 8 23.9 88 0 (< 95) < 500 5 - 7 - 3 - az23b4v3-v d6 4.21 4.39 8 0 (< 95) < 500 5 - 6 - 1 - az23b4v7-v d7 4.61 4.79 70 (< 7 8 ) < 500 5 - 5 2 - az23b5v1-v d 8 5 5.2 30 (< 60) < 4 8 05 - 3 4 > 0. 8 az23b5v6-v d9 5.49 5.71 10 (< 40) < 400 5 - 2 6 > 1 az23b6v2-v d10 6.0 8 6.32 4. 8 (< 10) < 200 5 - 1 7 > 2 az23b6v 8 -v d11 6.66 6.94 4.5 (< 8 ) < 150 5 2 7 > 3 az23b7v5-v d12 7.35 7.65 4 (< 7) < 50 5 - 3 7 > 5 az23b 8 v2-v d13 8 .04 8 .36 4.5 (< 7) < 50 5 4 7 > 6 az23b9v1-v d14 8 .92 9.2 8 4. 8 (< 10) < 50 5 5 8 > 7 az23b10-v d15 9. 8 10.2 5.2 (< 15) < 70 5 5 8 > 7.5 az23b11-v d16 10. 8 11.2 6 (< 20) < 70 5 5 9 > 8 .5 az23b12-v d17 11. 8 12.2 7 (< 20) < 90 5 6 9 > 9 az23b13-v d1 8 12.7 13.3 9 (< 25) < 110 5 7 9 > 10 az23b15-v d19 14.7 15.3 11 (< 30) < 110 5 7 9 > 11 az23b16-v d20 15.7 16.3 13 (< 40) < 170 5 8 0.5 > 12 az23b1 8 -v d21 17.6 1 8 .4 1 8 (< 50) < 170 5 8 0.5 > 14 az23b20-v d22 19.6 20.4 20 (< 50) < 220 5 8 10 > 15 az23b22-v d23 21.6 22.4 25 (< 55) < 220 5 8 10 > 17 az23b24-v d24 23.5 24.5 2 8 (< 8 0) < 220 5 8 10 > 1 8 az23b27-v d25 26.5 27.5 30 (< 8 0) < 250 5 8 10 > 20 az23b30-v d26 29.4 30.6 35 (< 8 0) < 250 5 8 10 > 22.5 az23b33-v d27 32.3 33.7 40 (< 8 0) < 250 5 8 10 > 25 az23b36-v d2 8 35.3 36.7 40 (< 90) < 250 5 8 10 > 27 az23b39-v d29 3 8 .2 39. 8 50 (< 90) < 300 5 10 12 > 29 az23b43-v d30 42.1 43.9 60 (< 100) < 700 5 10 12 > 32 az23b47-v d31 46.1 47.9 70 (< 100) < 750 5 10 12 > 35 az23b51-v d32 50 52 70 (< 100) < 750 5 10 12 > 3 8
az23-v-series vishay semiconductors document number 8 5759 rev. 1.6, 26-aug-10 www.vishay.com 4 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com typical characteristics (t amb = 25 c, unless otherwise specified) figure 1. forward characteristics figure 2. admissible power dissipation vs. ambient temperature figure 3. dynamic resistance vs. zener current 18114 ma 10 3 10 2 10 -1 10 -2 10 -3 10 -4 10 -5 10 1 i f v f 0 0.2 0.4 0.6 0.8 1 v t j = 100 c t j = 25 c 18115 m w 400 100 0 300 200 p tot t am b 0 100 200 c 500 18120 10 3 7 5 4 3 2 7 5 4 3 2 10 0.1 2345 2345 110 ma r zj i z t j = 25 c 47 + 51 43 39 36 10 2 figure 4. thermal differential resistance vs. zener voltage figure 5. dynamic resistance vs. zener voltage figure 6. temperature dependence of zener voltage vs. zener voltage 18121 10 3 5 4 3 2 5 4 3 2 10 2 1 r zth 5 4 3 2 10 1 2345 2345 10 100 v v z at i z = 5 ma negati v e positi v e v z t j r zth = r tha x v z x 18122 100 7 5 4 3 2 7 5 4 3 2 1 r zj 10 t j = 25 c i z = 5 ma 1 2345 2345 10 100 v v z 18123 25 20 15 10 5 0 - 5 m v /c v z t j 1 2345 2345 10 100 v v z 5 ma 1 ma 20 ma i z =
az23-v-series vishay semiconductors document number 8 5759 rev. 1.6, 26-aug-10 www.vishay.com 5 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com figure 7. change of zener voltag e vs. junction temperature figure 8 . temperature dependence of zener voltage vs. zener voltage figure 9. change of zener voltag e vs. junction temperature 18124 v z at i z = 5 ma 25 15 10 8 7 6.2 5.9 5.6 5.1 4.7 3.6 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 - 1 - 0.2 v z v t j 020406080 100 120 140 c 100 80 60 40 20 0 m v /c v z t j 0 20 40 80 60 100 v v z i z = 5 ma 18126 9 7 5 3 1 - 1 v v z 8 6 4 2 0 0 100 60 t j 20 40 120 80 140 c i z = 2 ma 51 43 36 figure 10. change of zener voltage from turn-on up to the point of thermal equilibrium vs. zener voltage figure 11. change of zener voltage from turn-on up to the point of thermal equilibrium vs. zener voltage figure 12. breakdown characteristics 18127 1.6 1.2 0.8 0.4 0 - 0.4 v v z 1.4 1 0.6 0.2 - 0.2 1 2345 2345 10 100 v v z at i z = 5 ma v z = r zth x i z 5 4 3 2 1 0 v v z 0 20 40 60 80 100 v v z i z = 5 ma i z = 2 ma v z = r zth x i z 18111 test c u rrent i z 5 ma 1 23456789 0 10 v v z 3.3 3.9 5.6 2.7 ma 50 40 30 20 10 0 l z t j = 25 c 8.2 6.8 4.7
az23-v-series vishay semiconductors document number 8 5759 rev. 1.6, 26-aug-10 www.vishay.com 6 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com layout for r thja test thickness: fiberglass 0.059 inches (1.5 mm) copper leads 0.012 inches (0.3 mm) figure 13. breakdown characteristics 18112 10 20 30 0 40 v v z ma 30 20 10 0 l z 33 test c u rrent i z 5 ma t j = 25 c 10 12 15 18 22 27 36 figure 14. breakdown characteristics 18113 ma 10 8 6 4 2 0 l z 10 20 30 40 50 60 70 80 90 0 100 v v z 43 39 test c u rrent i z 5 ma t j = 25 c 47 51 17451 15 (0.59) 12 (0.47) 0.8 (0.03) 5 (0.2) 7.5 (0.3) 3 (0.12) 1 (0.4) 1 (0.4) 2 (0.8) 2 (0.8) 1.5 (0.06) 5.1 (0.2)
az23-v-series vishay semiconductors document number 8 5759 rev. 1.6, 26-aug-10 www.vishay.com 7 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com package dimensions in millimeters (inches): sot-23 foot print recommendation: rev. 8 - date: 23.sept.2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
